Queclink GV75W cuenta con una gran innovación teniendo cero consumos de energía cuando el vehículo se encuentra apagado, permitiendo a los usuarios dejar sus vehículos sin uso durante largos períodos de tiempo sin tener que preocuparse por el agotamiento de la batería, asimismo su certificación IP67 aprueba de agua lo hace adecuado no sólo para motocicletas, sino también para cuatrimotos (ATV), embarcaciones y maquinaria pesada. 

Producto Descripción

UMTS/ HSPA Specifications
FrequencyUMTS: 850 / 1900 / 2100 MHz
UMTS: Class 3 (24+1/-3 dBm)
Transmission DataHSDPA R5: Max 3.6Mbps (DL)
WCDMA R99: Max 384Kbps (DL)/Max 384Kbps (UL)
GSM Specifications
FrequencyQuad band: 850 / 900 / 1800 / 1900 MHz
Compliant to GSM phase 2/2+
-Class 4 (2W @ 850/900 MHz)
-Class 1 (1W @ 1800/1900 MHz)
GPRSGPRS multi-slot class 12 (10 by default)
GPRS mobile station class B
GNSS Specifications
GNSS Typeu-blox All-in-One GNSS receiver
SensitivityAutonomous: -147 dBm
Hot start: -156 dBm
Reacquisition: -160 dBm
Tracking: -162 dBm
Position Accuracy (CEP)Autonomous: < 2.5m
TTFF (Open Sky)Cold start: 27s average
Warm start: 27s average
Hot start: 1s average
General Specifications
Dimensions102 × 46 × 20.5mm
4.02” (L) × 1.81” (W) × 0.81” (H)
Weight122g (4.30oz)
Backup BatteryLi-Polymer 1100mAh
Operating Voltage8V to 32V DC
Operating Temperature-30℃ ~ +70℃
WaterproofIP67 Compliant
Standby TimeWithout reporting: 140 hours
5 minutes’ reporting: 70 hours
10 minutes’ reporting: 80 hours
Zero power consumptionVehicle battery drain prevention when ignition is off
Interfaces
Digital Inputs1 positive trigger input for ignition detection, 1 negative trigger input for normal use(Compatible with TPM)
Digital Output1 digital output, open drain, 150 mA max drive current
Latched Digital Output1 digital output with internal latch circuit, open drain, 150 mA max drive current
Serial Port1 RS232 serial port on 11 pin cable, used for external devices (GARMIN protocol support)
Cellular AntennaInternal only
GNSS AntennaInternal only
LED IndicatorsCEL, GPS, PWR
USB Port1 USB port on 11 pin cable, used for upgrading
Air Interface Protocol
Transmit ProtocolTCP, UDP, SMS
Scheduled Timing ReportReport position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fencesGeo-fence alarm and parking alarm, support up to 20 internal geo-fence regions
Low Power AlarmAlarm when backup battery is low
Power On ReportReport when the device is powered on
Tow AlarmAlarm for tow event in ignition-off state
Driving Behavior MonitoringAggressive driving behavior detection, including harsh braking, acceleration, etc.
Crash DetectionAccident data collection for reconstruction and analysis
Special AlarmSpecial alarm based on the digital inputs
Remote ControlOTA control of digital outputs

×

Powered by

×

Notice: ob_end_flush(): failed to send buffer of zlib output compression (0) in /home/uazsmarzzl/public_html/wp-includes/functions.php on line 5107